[1]凌静秀,江吉彬,杨晓静,等.模切机压花辊系统振动特性分析[J].福建工程学院学报,2016,14(04):371-375.[doi:10.3969/j.issn.1672-4348.2016.04.012]
　Ling Jingxiu,Jiang Jibin,Yang Xiaojing,et al.Vibration characteristics analysis of embossing roller system for die-cutting machine[J].Journal of FuJian University of Technology,2016,14(04):371-375.[doi:10.3969/j.issn.1672-4348.2016.04.012]
点击复制

模切机压花辊系统振动特性分析()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第14卷
期数:
2016年04期
页码:
371-375
栏目:
出版日期:
2016-08-25

文章信息/Info

Title:
Vibration characteristics analysis of embossing roller system for die-cutting machine
作者:
凌静秀; 江吉彬; 杨晓静; 练国富
福建工程学院机械与汽车工程学院
Author(s):
Ling Jingxiu;  Jiang Jibin;  Yang Xiaojing;  Lian Guofu
College of Mechanical and Automotive Engineering, Fujian University of Technology
关键词:
旋转模切机;  刀架;  虚拟样机;  振动特性
Keywords:
rotary die-cutting machine;  tool carrier;  virtual prototype;  vibration characteristics
分类号:
TH113
DOI:
10.3969/j.issn.1672-4348.2016.04.012
文献标志码:
A
摘要:
随着旋转模切机转速的提高，刀架及齿辊等结构振动剧烈，使得整个系统的动态性能指标无法满足设计要求。基于虚拟样机技术及有限元法，采用ADAMS软件建立模切机压花辊系统的虚拟样机模型，对系统在300 m/min线速度且空载的情况进行动力学仿真，提取得到齿辊的支承轴承动态载荷历程。同时开展刀架的模态分析，并以动力学仿真结果作为输入条件，进行刀架的谐响应分析，探测结构的共振响应，为设备的动态性能校核及参数优化提供参考。
Abstract:
As the speed of rotary die-cutting machine increases, the cutter frame and tooth roller vibrate sharply, which affects the system dynamic performance of the die-cutting machine. Based on the virtual prototype technology and finite element method, ADAMS software was employed to establish a virtual prototype model of the embossing roller system. In addition, the system dynamic simulation was conducted at a load-free linear velocity of 300 m/min to extract the bearing loadings of the tooth roller. Then the cutter frame modal analysis was performed. The cutter frame harmonic response was analysed with the results of dynamic simulation as input to examine the structure resonance response. The results can contribute to the dynamic performance verification and the parameters optimization of equipment.

参考文献/References:

[1] 张玲.高速自动模切机主机墙板的应力分析和结构优化[D].上海：同济大学,2007.
[2] 丁毅,张波,曾珊琪.模切机工作台运动特征分析及实现[J].机械设计与制造,2011(7):197-198.
[3] 赵荣丽,陈新,李克天,等.简化橡胶层材料的送纸机构主轴有限元分析[J].机械设计与制造,2011(8):10-12.
[4] 薛超志,齐元胜,张伟,等.模切机机架的有限元分析[J].包装工程,2011(9):62-65.
[5] 付兴娥,李磊,李伟.全自动圆压平模切机机架的有限元分析及改进[J].机械与电子,2010(11):42-44.
[6] 李桂红,成刚虎.平压模切机构及其运动协调性的分析研究[J].包装与食品机械,2003,21(5)：5-7.
[7] 王西珍.全自动平压平模切机肘杆机构精度分析及可靠性设计[D].西安：西安理工大学，2006.
[8] 吴昊.滚动轴承动特性及轴承-转子系统动力学模型研究[D].上海：华东理工大学，2010.

相似文献/References:

[1]凌静秀,张宁,杨晓静,等.多因素影响下旋转模切机压花辊系统动态响应[J].福建工程学院学报,2018,16(06):530.[doi:10.3969/j.issn.1672-4348.2018.06.005]
　LING Jingxiu,ZHANG Ning,YANG Xiaojing,et al.Dynamic responses of the rotary die-cutting machine’sembossing roller system under the influence of multi-factors[J].Journal of FuJian University of Technology,2018,16(04):530.[doi:10.3969/j.issn.1672-4348.2018.06.005]

更新日期/Last Update: 2016-08-25