[1]黄润.单肋拱加劲V型撑刚构连续梁桥性能分析[J].福建理工大学学报,2024,22(06):520-526.[doi:10.3969/j.issn.2097-3853.2024.06.002]
　HUANG Run.Performance analysis of V-shaped rigid structure continuous beam bridge with single-rib arch strengthening[J].Journal of Fujian University of Technology;,2024,22(06):520-526.[doi:10.3969/j.issn.2097-3853.2024.06.002]
点击复制

单肋拱加劲V型撑刚构连续梁桥性能分析
分享到：

《福建理工大学学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第22卷
期数:
2024年06期
页码:
520-526
栏目:
出版日期:
2024-12-25

文章信息/Info

Title:
Performance analysis of V-shaped rigid structure continuous beam bridge with single-rib arch strengthening
作者:
黄润
福建省交通规划设计院有限公司
Author(s):
HUANG Run
Fujian Provincial Communications Planning and Design Institute Co., Ltd.
关键词:
单肋拱加劲V型撑刚构连续梁; 梁拱组合结构; 全桥空间网格三维仿真; 实用精细化分析
Keywords:
V-shaped rigid structure continuous beam with single-rib arch strengthening; beam-arch combined structure; 3D simulation of full bridge space grid; practical fine analysis
分类号:
U442.5
DOI:
10.3969/j.issn.2097-3853.2024.06.002
文献标志码:
A
摘要:
为美化桥型，提高连续梁桥的跨越能力，有效解决关键部位应力集中产生裂缝等工程问题，以福州市湾边特大桥为例，提出了单肋拱加劲V 型撑刚构连续梁桥结构。分析结果表明：该结构通过调整拱肋刚度、优化结构设计，研发相应的施工工艺，有效控制了裂缝发生及发展；整体受力方面，拱肋分担了二期恒载34.4%和活载23.5%弯矩，确实起到良好的加劲作用；吊点处拱肋加劲构造出现局部应力集中区，通过加强钢板厚度有效解决；横梁与箱梁翼缘板刚度差异大，拉应力较为集中，采取横梁与箱梁翼缘板间增设倒角满足力学指标。经过多年的运营监测证明了单肋拱加劲V 型撑刚构连续梁桥结构合理性和可实施性，可为同类桥梁设计与施工提供技术指导。
Abstract:
This research aims to beautify the bridge type, improve the spanning capacity of the continuous beam bridge, and effectively solve the engineering problems such as cracks caused by stress concentration in key parts. Taking Fuzhou Bay Bridge as an example, the single-rib arch reinforced V-shaped rigid structure continuous beam bridge structure is put forward. Analysis results show that the structure effectively controls the occurrence and development of cracks by adjusting the stiffness of the arch rib, optimizing the structure design and developing the corresponding construction technology；in terms of overall force, the arch rib shares 34.4% of Phase II constant load and 23.5% of bending moment in live load, which has a good strengthening effect；the local stress concentration area appears at the lifting point, which is effectively solved by strengthening the thickness of the steel plate；the stiffness difference between the flange plate of the cross beam and the box girder is large, and the tensile stress is relatively concentrated, so the chamfer between the beam and the box girder is adopted to meet the mechanical index. Years of operation monitoring has proved the rationality and feasibility of the single-rib arch reinforced V-shaped rigid structure continuous beam bridge, which can provide technical guidance for the design and construction of similar bridges.

参考文献/References:

［1］ 刘宇闻，傅少君，瞿国钊. V形刚构-拱组合桥静力有限元分析［J］. 公路交通科技，2010，27（10）：66-71.［2］ 勾红叶，蒲黔辉，陈志伟，等.大跨度 V形刚构拱组合桥拱与梁的刚度研究［J］ .公路交通科技，2013，30（7）:97-102.［3］ 张耀万. 某V形刚构连续梁拱组合桥隔震性能有限元分析［J］. 兰州工业学院学报，2021，28（3）：25-30.［4］ 李文文. V形桥墩张角对连续刚构—系杆拱组合桥受力性能影响研究［J］. 公路，2021，66（12）：143-148.［5］ 王达，任灿. V形刚构组合拱桥拱脚局部受力分析与钢束布置优化研究［J］ .公路与汽运，2023（1）:125-128.［6］ 刘海青，张杰，黄润，等. 一种单肋拱加劲V型撑刚构—连续梁桥及其施工方法［P］. 中国：ZL 2015 1 0067304.4，2015.［7］ 李国平. 连续拱梁组合桥的性能与特点［J］. 桥梁建设，1999，29（1）：10-13.［8］ 金成棣. 预应力混凝土梁拱组合桥梁：设计研究与实践：现代桥梁技术丛书［M］. 北京：人民交通出版社，2001.［9］ 中华人民共和国交通部. 公路钢筋混凝土及预应力混凝土桥涵设计规范：JTG D 62—2004［S］. 北京：人民交通出版社，2004.［10］ 中华人民共和国交通运输部. 公路钢管混凝土拱桥设计规范：JTG/T D65-06—2015［S］. 北京：人民交通出版社，2015.［11］ 中华人民共和国交通运输部. 公路钢结构桥梁设计规范：JTG D64—2015［S］. 北京：人民交通出版社，2015.

更新日期/Last Update: 2024-12-25