[1]杨晓静、凌静秀、银光球.大型自移式破碎站钢结构落料冲击系数研究[J].福建工程学院学报,2017,15(01):30-34.[doi:10.3969/j.issn.1672-4348.2017.01.007]
　Yang Xiaojing,Ling Jingxiu,Yin Guangqiu.Research on blanking impact coefficient of steel structure in large self-mobile crushing station[J].Journal of FuJian University of Technology,2017,15(01):30-34.[doi:10.3969/j.issn.1672-4348.2017.01.007]
点击复制

大型自移式破碎站钢结构落料冲击系数研究()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第15卷
期数:
2017年01期
页码:
30-34
栏目:
出版日期:
2017-02-25

文章信息/Info

Title:
Research on blanking impact coefficient of steel structure in large self-mobile crushing station
作者:
杨晓静、凌静秀、银光球
福建工程学院机械学院机械设计教研室
Author(s):
Yang Xiaojing;  Ling Jingxiu;  Yin Guangqiu
College of Mechanical and Automotive Engineering, Fujian University of Technology
关键词:
自移式破碎站;  落料冲击系数;  刚体动力学;  柔体动力学
Keywords:
Self-mobile crushing station;  blanking impact coefficient;  rigid body dynamics;  flexible body dynamics
分类号:
TD402
DOI:
10.3969/j.issn.1672-4348.2017.01.007
文献标志码:
A
摘要:
基于虚拟样机技术及有限元法，提出了破碎站钢结构的力学模型等效及落料冲击系数的数值模拟方法，采用理论公式对单块物料冲击钢结构的动载系数进行计算，并将其与数值模拟分析结果对比。分析表明，1m3大小的正方体煤岩物料从5m高度下落直接冲击钢结构，其冲击系数的理论计算及刚体动力学分析结果均为123，而柔体动力学分析结果为125，三者误差约1.6%，表明提出的数值模拟方法及钢结构等效模型有效，分析方法可为破碎站的性能评估及结构优化提供基础。
Abstract:
Based on the virtual prototype technology and finite element method, a mechanical model of the steel structure of crushing station and a numerical simulation method of blanking impact coefficient were proposed. Then the dynamic load coefficient of a single material was calculated by theoretical formula, and it was compared with the numerical simulation result. When a cubic coal rock of 1m3 hit the steel structure directly from a height of 5m, the theoretical impact coefficients and rigid body dynamic results were 123, while the flexible body dynamic analysis result was 125, the error of which being about 1.6%. It is indicated that the numerical simulation method and the equivalent model of the steel structure are effective, and the analysis method can provide a basis for the performance evaluation and structure optimization of the crushing station.

参考文献/References:

[1] 王保强.全移动破碎站主结构模态分析[J].矿山机械,2016(1):63-66.
[2] 安晓卫,赵满平,张庆民.半固定式破碎站钢结构的有限元分析[J].沈阳理工大学学报,2007,26(5):1-5.
[3] 宋波,刘畅,孙晓光.大型露天矿半移动式破碎站破碎部钢结构力学分析研究[J].矿山机械,2013(12):77-81.
[4] 胡昊.半移动式破碎站钢结构分析及受力计算[J].煤矿机械,2012,33(4):46-48.
[5] Rusiński E, Moczko P, Pietrusiak D, et al. Experimental andnumerical studies of jaw crusher supporting structure fatigue failure[J]. Strojniski Vestnik,2013,59(9):556-563.
[6] 吕廷.破碎工作站机架及给料系统动态特性分析[D].无锡：江南大学,2008.
[7] 孙聪.质量慢变自移式破碎机动力学及稳定性分析[D].沈阳：东北大学,2014.
[8] Huo Junzhou, Yu Shiqiang, Yang Jing, et al. Static and dynamic characteristics of the chain drive system of a heavy duty apron feeder[J]. Open Mechanical Engineering Journal,2013,7(1):121-128.
[9] 张守云,李春亭.动载弹性冲击系数的理论推导及仿真验证[J]. CAD/CAM与制造业信息化,2011(2):66-68.
[10] 叶四桥,陈洪凯,唐红梅.落石冲击力计算方法[J].中国铁道科学,2010,31(6):56-62.
[11] 叶龙,陈希红,卢崇劭,等.煤岩散料冲击系数试验研究[J].煤矿机械,2015,36(12):103-105.

更新日期/Last Update: 2017-04-12