[1]连立川,张鹏程,刘燕妮,等.基于BIM的结构钢筋与机电系统翻模研究——以福州市规划院产业楼为例[J].福建工程学院学报,2016,14(01):24-27.[doi:10.3969/j.issn.1672-4348.2016.01.006]
　Lien Li-Chuan,Zhang Pengcheng,Liu Yan-Ni,et al.A case study (PDR office building) of structural reinforced bar and MEP system remodelling via BIM model[J].Journal of FuJian University of Technology,2016,14(01):24-27.[doi:10.3969/j.issn.1672-4348.2016.01.006]
点击复制

基于BIM的结构钢筋与机电系统翻模研究——以福州市规划院产业楼为例()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第14卷
期数:
2016年01期
页码:
24-27
栏目:
出版日期:
2016-02-25

文章信息/Info

Title:
A case study (PDR office building) of structural reinforced bar and MEP system remodelling via BIM model
作者:
连立川; 张鹏程; 刘燕妮; 范冰辉; 戴薇原
福建工程学院土木工程学院
Author(s):
Lien Li-Chuan;  Zhang Pengcheng;  Liu Yan-Ni;  Fan Binghui;  Dai Weiyuan
College of Civil Engineering, Fujian University of Technology
关键词:
建筑信息模型;  Autodesk Revit;  复杂节点处理;  碰撞检查;  翻模处理
Keywords:
building information modelling(BIM); Autodesk Revit; complex node treatment; collision check; remodelling
分类号:
TU17
DOI:
10.3969/j.issn.1672-4348.2016.01.006
文献标志码:
A
摘要:
基于建筑信息模型（Building Information Modeling, BIM)）概念，以福州市规划设计研究院新建大楼为实际案例，应用Autodesk Revit软件将原有CAD图纸进行BIM结构钢筋和机电模型建置，并提出BIM技术虚拟仿真过程中发现的问题。研究结果表明：（１）BIM技术可实际解决工程常常出现钢筋复杂节点、机电管道碰撞的问题；（２）机电系统进行Revit翻模时，不能按原CAD路径绘制，族库不全需建族完善。该研究成果可为后期施工决策提供技术支持，并有助于相关行业人士学习与借鉴。
Abstract:
Taking Fuzhou Planning Design and Research Institute (PDR) research building as a real case, Autodesk Revit was employed to remodel structural reinforced bar and MEP builder designed by CAD via building information modelling (BIM). Problems involved in BIM application during virtual simulation process were revealed. The results are as follows: (1) BIM can solve the problems such as structural reinforced bar complex nodes and complex pipeline collisions in practical engineering; (2) It is inconvenient to build BIM model based on the original CAD design drawing and needs to build various family components while remodelling MEP system through Revit software. The results can provide technical support for the later construction decisionmaking and can provide references for experts in the relevant fields.

参考文献/References:

[1] 王雪青,张康照,谢银. BIM模型的创建和来源选择[J].建筑经济,2011（9）:90-92.
[2] 江宇冠,吴平春,王耀,等. BIM技术在某工程复杂节点钢筋设计中的应用[J].施工技术,2013（24）:93-96.
[3] 柏万林,刘玮,陶君. BIM技术在某项目机电安装工业化中的应用[J].施工技术,2015（22）:120-124.

相似文献/References:

[1]陈永乐.基于Dynamo的民用建筑防火参数化设计方法——以疏散宽度设计为例[J].福建工程学院学报,2021,19(06):588.[doi:10.3969/j.issn.1672-4348.2021.06.014]
　CHEN Yongle.Research on parametric design method of civil building fire prevention 〖JZ〗based on Dynamo: a case study of evacuation width design[J].Journal of FuJian University of Technology,2021,19(01):588.[doi:10.3969/j.issn.1672-4348.2021.06.014]

更新日期/Last Update: 2016-02-25