[1]张东贵、刘成武、肖开政、王乾廷、林光磊、范永达.基于轻量化的物流栏板车车身结构有限元分析[J].福建工程学院学报,2020,18(03):235-240.[doi:10.3969/j.issn.1672-4348.2020.03.006]
　ZHANG Donggui,LIU Chengwu,XIAO Kaizheng,et al.Finite element analysis of the body structure of logistics pallet car based on lightweight[J].Journal of FuJian University of Technology,2020,18(03):235-240.[doi:10.3969/j.issn.1672-4348.2020.03.006]
点击复制

基于轻量化的物流栏板车车身结构有限元分析()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第18卷
期数:
2020年03期
页码:
235-240
栏目:
出版日期:
2020-06-25

文章信息/Info

Title:
Finite element analysis of the body structure of logistics pallet car based on lightweight
作者:
张东贵、刘成武、肖开政、王乾廷、林光磊、范永达
福建省闽铝轻量化汽车制造有限公司
Author(s):
ZHANG Donggui;  LIU Chengwu;  XIAO Kaizheng;  WANG Qianting;  LIN Guanglei;  FAN Yongda
Fujian Aluminum Lightweight Automobile Manufacturing Co. Ltd.
关键词:
轻量化; 铝合金; 栏板车; 典型工况
Keywords:
lightweight;  aluminum alloy;  pallet car;  typical working conditions
分类号:
U463.32
DOI:
10.3969/j.issn.1672-4348.2020.03.006
文献标志码:
A
摘要:
为解决车辆负载过重问题，对铝合金栏板车车身及车架进行三维建模，利用HyperWorks 构建车身及车架的有限元模型。 模拟栏板车满载时的弯曲、扭转、紧急制动和紧急转弯4 种工况，施加相应的载荷与边界条件。 经过有限元仿真分析，获得了该车身(包括车架) 在不同工况下的应力分布状况，在存有较大设计余量的基础上，采用减薄壁厚和移动横梁的方法对车身结构改进。 结果表明:改进后的车身结构能够满足各典型工况的强度和刚度性能要求，质量比改进前减少了5.7%，从而为栏板车的结构设计和改进提供依据。
Abstract:
In order to solve the problem of overload of the vehicle, 3D model of the body and frame of the aluminum alloy pallet car was built, and a finite element model of the body and frame was constructed with HyperWorks. After that, four working conditions of full-load bending, torsion, emergency braking and turning were simulated, and the corresponding loads and boundary conditions were applied. Consequently, the stress distribution of the body and the frame under different conditions was obtained through finite element analysis. Based on the existence of a large design margin, the method of thinning the wall thickness and moving the beams was used to improve the car body structure. Results show that the improved body structure can meet the strength and stiffness performance requirements of each typical working condition, and the mass is reduced by 5.7% compared with that before the improvement, thus providing a basis for the structural design and improvement of the pallet car.

参考文献/References:

[1] 范子杰, 桂良进, 苏瑞意. 汽车轻量化技术的研究与进展[J]. 汽车安全与节能学报, 2014, 5(1): 1-16.[2] 宋燕利, 徐勤超, 徐峰祥, 等. 考虑振动特性的钢铝复合车架多学科优化[J]. 中国机械工程, 2019, 30(7): 846-851, 876. [3] PARK J, KIM K. Optimal design of camber link component for light weight automobile using CAE (Computer Aided Engineering)[J]. International Journal of Precision Engineering and Manufacturing, 2013, 14(8): 1433-1437. [4] PARK J, KIM S,CHOI B, et al. Optimal design of rear chassis components for lightweight automobile using design of experiment[J]. Materialwissenschaft und Werkstofftechnik, 2010, 41(5): 391-397. [5] 王凯, 何勇灵, 孟广威. 客车铝合金车架设计与典型工况分析[J]. 北京航空航天大学学报, 2018, 44(8): 1780-1786.[6] NAM J, SHIN H, CHOI G. Durability prediction for automobile aluminum frontsubframe using nonlinear models in virtual test simulations[J]. International Journal of Automotive Technology, 2014, 15(4): 593-601.[7] 李永兵, 马运五, 楼铭, 等. 轻量化多材料汽车车身连接技术进展[J]. 机械工程学报, 2016, 52(24): 1-23.[8] 郑松林, 王彦生, 卢曦, 等. 基于强度变化特征的汽车结构件轻量化设计方法[J]. 机械工程学报, 2008, 44(2): 129-133. [9] 兰凤崇, 庄良飘, 钟阳, 等. 乘用车车身结构轻量化设计技术研究与实践[J]. 汽车工程, 2010, 32(9): 763-768, 773.[10] 苏瑞意, 桂良进, 吴章斌, 等. 大客车车身骨架多学科协同优化设计[J]. 机械工程学报, 2010, 46(18): 128-133.[11] 潘锋, 朱平. 面向约束优化的改进响应面法在车身轻量化设计中的应用[J]. 机械工程学报, 2011, 47(10): 82-87.[12] 贾秀娴, 杜宇, 于野, 等. 声黑洞理论应用于板类结构的轻量化减振分析[J]. 振动工程学报, 2018, 31(3): 434-440.

相似文献/References:

[1]李剑彬,张铮,郑秀梅,等.6061-T4铝合金方管压弯构件平面内稳定性研究[J].福建工程学院学报,2016,14(06):538.[doi:10.3969/j.issn.1672-4348.2016.06.005]
　Li Jianbin,Zhang Zheng,Zheng Xiumei,et al.Stability bearing capacity research of 6061-T4 aluminium alloy members beam-column with box section[J].Journal of FuJian University of Technology,2016,14(03):538.[doi:10.3969/j.issn.1672-4348.2016.06.005]
[2]郑秀梅、李剑彬 、张铮、谈夏维.方管截面铝合金轴心受压构件力学性能研究[J].福建工程学院学报,2017,15(01):21.[doi:10.3969/j.issn.1672-4348.2017.01.005]
　Zheng Xiumei,Zhang Zheng,Li Jianbin,et al.Study on mechanical performance of box-section aluminium alloy members under axial compression[J].Journal of FuJian University of Technology,2017,15(03):21.[doi:10.3969/j.issn.1672-4348.2017.01.005]
[3]张铮、黄娟娟、谈夏维、廖仁生.铝合金框架结构二阶效应的有限元分析[J].福建工程学院学报,2019,17(03):205.[doi:10.3969/j.issn.1672-4348.2019.03.001]
　ZHANG Zheng,HUANG Juanjuan,TAN Xiawei,et al.Finite element analysis of second-order effect of aluminum alloy frame structure[J].Journal of FuJian University of Technology,2019,17(03):205.[doi:10.3969/j.issn.1672-4348.2019.03.001]
[4]陈培旭、张铮、冯若若.顶底角型件高强螺栓连接铝合金梁柱节点有限元分析[J].福建工程学院学报,2021,19(03):268.[doi:10.3969/j.issn.1672-4348.2021.03.011]
　CHEN Peixu,ZHANG Zheng,FENG Ruoruo.Finite element analysis of aluminum alloy beam-column nodes connected by top-bottom corner-piece high-strength bolts[J].Journal of FuJian University of Technology,2021,19(03):268.[doi:10.3969/j.issn.1672-4348.2021.03.011]
[5]冯若若,张铮,邵珂珂.铝合金环槽铆钉连接节点弯矩－转角关系[J].福建工程学院学报,2022,20(03):219.[doi:10.3969/j.issn.1672-4348.2022.03.003]
　FENG Ruoruo,ZHANG Zheng,SHAO Keke.Study on moment-rotation relationship of aluminum alloy swag-locking pins[J].Journal of FuJian University of Technology,2022,20(03):219.[doi:10.3969/j.issn.1672-4348.2022.03.003]
[6]邓淑丹,林光磊,黄登峰,等.光伏跟踪支架风荷载的确定及结构优化设计[J].福建工程学院学报,2023,21(06):558.[doi:10.3969/j.issn.1672-4348.2023.06.008]
　DENG Shudan,LIN Guanglei,HUANG Dengfeng,et al.Wind load determination and structuraloptimization design of photovoltaic tracking supports[J].Journal of FuJian University of Technology,2023,21(03):558.[doi:10.3969/j.issn.1672-4348.2023.06.008]

更新日期/Last Update: 2020-06-25