[1]黄登峰,胡明建,闫晓磊,等.基于Trucksim的城市客车典型工况悬架动载荷提取[J].福建工程学院学报,2022,20(03):239-243.[doi:10.3969/j.issn.1672-4348.2022.03.006]
　HUANG Dengfeng,HU Mingjian,YAN Xiaolei,et al.Dynamic load extraction of suspension under typical working conditions for city bus based on Trucksim[J].Journal of FuJian University of Technology,2022,20(03):239-243.[doi:10.3969/j.issn.1672-4348.2022.03.006]
点击复制

基于Trucksim的城市客车典型工况悬架动载荷提取()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第20卷
期数:
2022年03期
页码:
239-243
栏目:
出版日期:
2022-06-25

文章信息/Info

Title:
Dynamic load extraction of suspension under typical working conditions for city bus based on Trucksim
作者:
黄登峰; 胡明建; 闫晓磊; 林光磊; 石志纲
福建工程学院材料科学与工程学院
Author(s):
HUANG Dengfeng;  HU Mingjian;  YAN Xiaolei;  LIN Guanglei;  SHI Zhigang
School of Mechanical and Automobile Engineering, Fujian University of Technology
关键词:
城市客车; 多体动力学; 载荷提取; Trucksim
Keywords:
city bus;  multi-body dynamics;  load exaction;  Trucksim
分类号:
U461.1
DOI:
10.3969/j.issn.1672-4348.2022.03.006
文献标志码:
A
摘要:
以城市客车为平台，分析其车辆动力学各子系统的型式和参数，根据现有积累的试验测试数据，采用Trucksim软件建立整车多体动力学模型。在此基础上，对城市客车制动、转弯、冲击及扭曲等典型运行工况进行动态模拟，提取出悬架系统各部件的受力情况，包括弹簧、减震器等。结果表明，城市客车在冲击工况下悬架整体受载最大。该仿真结果能够为城市客车有限元模型各典型工况下的载荷施加提供精确的输入，有利于提高受力分析的准确度。
Abstract:
With the city bus as a platform, the types and parameters of each subsystem of vehicle dynamics were analyzed, and the multi-body dynamics model of the vehicle was established by Trucksim software according to the existing accumulated test data. On this basis, the dynamic simulation of the typical working conditions such as braking, turning, impact and torsion of the city bus was carried out, and the force of each component of the suspension system, including spring and shock absorber, was extracted. Results show that the overall load of the suspension of the city bus is the largest under the impact condition. The simulation results can provide accurate input for the load application of the finite element model of the city bus under various typical working conditions, which is beneficial to improve the accuracy of the force analysis.

参考文献/References:

[1] 王旭飞, 焦登宁, 谭飞, 等. 基于灵敏度分析的客车骨架轻量化设计[J]. 现代制造工程, 2021（9）: 52-57.[2] 方学良, 陈靖芯, 景科, 等. 客车车身骨架静态特性分析及优化[J]. 扬州大学学报（自然科学版）, 2019, 22（3）: 65-68, 78.[3] 王钰明, 顾添翼, 戴其燕, 等. 基于改进响应面法的纯电动客车车身结构优化设计[J]. 机械设计, 2019, 36（S1）: 97-103. [4] 丁晓明, 吕俊成, 王伟. 基于典型工况的汽车后桥壳结构轻量化优化设计[J]. 中国机械工程, 2016, 27（8）: 1047-1052. [5] 苗冬梅. 基于车辆系统动力学建模仿真的整车疲劳动载荷分析研究[D]. 长春: 吉林大学, 2017.[6] 张波, 王泽康. 基于ADAMS的防爆特殊型铲板式搬运车动力学分析[J]. 煤炭科学技术, 2019, 47（S2）: 108-112. [7] 周美施,尹怀仙,张铁柱,张洪信,刘高君.基于动态峰值力的客车骨架轻量化研究[J].现代制造工程,2017(05):59-64. [8] LI L H, GUO T Y, XU S J. Simulation analysis of vehicle handling stability based on trucksim[J]. Journal of Physics: Conference Series, 2021, 1885（3）: 032043.[9] 王传连, 胡月琦, 李平. 基于TruckSim的装载工况影响下弯道安全车速阈值[J]. 北京航空航天大学学报, 2018, 44（6）: 1337-1346.[10] 唐歌腾, 任春晓, 李臣. 基于Trucksim的不同弯道半径安全车速确定方法[J]. 公路交通科技, 2016, 33（6）: 134-139.[11] 吴涛, 焦静, 范学琼, 等. 基于Trucksim的整车动力性能仿真分析[J]. 汽车实用技术, 2016（6）: 63-65.[12] 章雪华, 石柏军, 李岩. 基于Trucksim整车操纵稳定性仿真分析研究[J]. 机械设计与制造工程, 2017, 46（2）: 30-34.

更新日期/Last Update: 2022-06-25