[1]朱逸韬、黄卫东（通）、张伟杰、陈侠宇、赖章鹏.基于SLM的18Ni-300模具钢工艺参数优化[J].福建工程学院学报,2020,18(06):570-575.[doi:10.3969/j.issn.1672-4348.2020.06.011]
　ZHU Yitao,HUANG Weidong,ZHANG Weijie,et al.Process parameter optimization of 18Ni-300 tool steel based on selective laser melting[J].Journal of FuJian University of Technology,2020,18(06):570-575.[doi:10.3969/j.issn.1672-4348.2020.06.011]
点击复制

基于SLM的18Ni-300模具钢工艺参数优化()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第18卷
期数:
2020年06期
页码:
570-575
栏目:
出版日期:
2020-12-25

文章信息/Info

Title:
Process parameter optimization of 18Ni-300 tool steel based on selective laser melting
作者:
朱逸韬、黄卫东（通）、张伟杰、陈侠宇、赖章鹏
福建工程学院机械与汽车工程学院快速成型实验室
Author(s):
ZHU Yitao;  HUANG Weidong;  ZHANG Weijie;  CHEN Xiayu;  LAI Zhangpeng
School of Mechanical and Automotive Engineering, Fujian University of Technology
关键词:
激光选区熔化; 致密度; 工具钢; 田口试验分析
Keywords:
selective laser melting (SLM);  density;  tool steel;  Taguchi experiment
分类号:
TG142
DOI:
10.3969/j.issn.1672-4348.2020.06.011
文献标志码:
A
摘要:
设计了以激光功率、扫描速度、扫描间距、铺粉厚度为因素的正交实验，研究了SLM 成型18Ni-300 模具钢粉末过程中各个工艺参数对成型件致密度的影响规律，并进行了工艺参数优化。实验表明，在选定范围内，成型件致密度随激光功率的增加先增大后减小?随扫描速度的增加持续减小?随扫描间距的增加先增加后减小?随铺粉厚度的增加持续减小。最优工艺参数组为激光功率260 W、扫描速度500 mm/ s、扫描间距0.11 mm、铺粉厚度0.02 mm 时，成型件致密度99.99%，为所有实验中的最优值。
Abstract:
A Taguchi experiment was designed with laser power, scan speed, hatch space and layer thickness as factors. The effects of each processing parameter on the density of the molded parts in the process of SLM of 18Ni-300 tool steel powder was studied, and the process parameters were optimized. Experiments show that in the selected range, the density of the forming part first increases and then decreases with the increase of laser power; with the increase of scanning speed, the density decreases continuously; with the increase of hatch space, it first increases and then decreases; with the increase of layer thickness, it decreases continuously. The optimal process parameters were as follows: when the laser power was 260W, the scanning speed was 500mm/s, the hatch space was 0.11mm, and the layer thickness was 0.02mm, the resulted density was 99.99%, which was the optimal value in all the experiments.

参考文献/References:

[1] 谭超林, 周克崧, 马文有, 等. 激光增材制造成型马氏体时效钢研究进展[J]. 金属学报, 2020, 56(1): 36-52.[2] 顾冬冬, 张红梅, 陈洪宇, 等. 航空航天高性能金属材料构件激光增材制造[J]. 中国激光, 2020, 47(5): 32-55.[3] 白玉超. 马氏体时效钢激光选区熔化成型机理及其控性研究[D]. 广州: 华南理工大学, 2018.[4] 张国会, 郭绍庆, 黄帅, 等. 选区激光熔化技术制备GH4169合金的致密度研究[J]. 激光与光电子学进展, 2020, 57(3): 163-169.[5] 陈侠宇, 黄卫东, 张伟杰, 等. 基于灰色关联分析的选区激光熔化成形18Ni-300模具钢多目标工艺优化[J]. 中国激光, 2020, 47(5): 341-351[6] FERREIRA J, SANTOS L, DA SILVA J, et al. Assessment of the fatigue life on functional hybrid laser sintering steel components[J]. Procedia Structural Integrity, 2016, 1: 126-133.[7] 程博, 张璧, 白倩, 等. 选区激光熔化马氏体时效钢(18Ni-300)工艺参数研究[J]. 大连理工大学学报, 2018, 58(5): 471-478.[8] 杨立军, 郑航, 李俊. 激光选区熔化制造工艺参数对316L成型件致密度与表面硬度的影响规律研究[J]. 应用激光, 2020, 40(1): 7-12.[9] 马英怡, 刘玉德, 石文天, 等. 扫描速度对选区激光熔化316L不锈钢粉末成形缺陷及性能的影响[J]. 激光与光电子学进展, 2019, 56(10): 210-219.[10] CAMPANELLI S, ANGELASTRO A, SIGNORILE C, et al. Investigation on direct laser powder deposition of 18 Ni (300) marage steel using mathematical model and experimental characterization[J]. The International Journal of Advanced Manufacturing Technology, 2017, 89(1/2/3/4): 885-895.[11] 魏富涛, 许冠, 毛卫东, 等. 18Ni-300模具钢激光选区熔化工艺优化及力学性能研究[J]. 粉末冶金技术, 2019, 37(3): 214-219.[12] MAXIMENKO A, OLEVSKY E. Pore filling during selective laser melting-assisted additive manufacturing of composites[J]. Scripta Materialia, 2018, 149: 75-78.

相似文献/References:

[1]姚耀伍,许明三,曾寿金,等.SLM成型AlSi10Mg倾斜薄壁件壁厚响应面法优化[J].福建工程学院学报,2022,20(01):19.[doi:10.3969/j.issn.1672-4348.2022.01.004]
　YAO Yaowu,XU Mingsan,ZENG Shoujin,et al.Wall thickness optimization of laser-melted AlSi10Mg inclined thin-wall parts by response surface method[J].Journal of FuJian University of Technology,2022,20(06):19.[doi:10.3969/j.issn.1672-4348.2022.01.004]

更新日期/Last Update: 2020-12-25