[1]刘成武、郭小斌.碳纤维复合材料板振声特性分析及优化[J].福建工程学院学报,2020,18(06):518-523.[doi:10.3969/j.issn.1672-4348.2020.06.002]
　LIU Chengwu,GUO Xiaobin.Analysis and optimization of vibration and acoustic characteristics of 〖JZ〗carbon fiber composite plates[J].Journal of FuJian University of Technology,2020,18(06):518-523.[doi:10.3969/j.issn.1672-4348.2020.06.002]
点击复制

碳纤维复合材料板振声特性分析及优化()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第18卷
期数:
2020年06期
页码:
518-523
栏目:
出版日期:
2020-12-25

文章信息/Info

Title:
Analysis and optimization of vibration and acoustic characteristics of 〖JZ〗carbon fiber composite plates
作者:
刘成武、郭小斌
福建工程学院机械与汽车工程学院
Author(s):
LIU Chengwu;  GUO Xiaobin
School of Mechanical and Automotive Engineering, Fujian University of Technology
关键词:
碳纤维复合材料板; 振动声辐射; 辐射声功率; 辐射效率; 优化
Keywords:
carbon fiber composite plates;  vibration acoustic radiation;  acoustic radiation power;  radiation efficiency;  optimization
分类号:
TB532
DOI:
10.3969/j.issn.1672-4348.2020.06.002
文献标志码:
A
摘要:
为了研究结构几何参数及铺层参数改变对碳纤维复合板的振动声辐射特性影响，利用有限元/边界元法计算了碳纤维复合材料板的振动声辐射特性参数，并以降低结构振动噪声为目标对其进行了优化分析。研究表明:加筋、增加筋数和增加铺设层数能降低结构的辐射噪声。3 种铺层角度中，[0°/90°/45°]辐射噪声最低。在第一阶波峰处，优化后声功率值相比优化前减少了大约4 dB。研究结果可为降低结构辐射噪声提供理论依据。
Abstract:
The influence of the changes in structural geometric parameters and laminate parameters on the vibration and acoustic radiation of the carbon fiber composite plate was investigated herein. Through the finite element/boundary element method, the characteristic parameters of the vibration and acoustic radiation of the carbon fiber composite plate was calculated, and optimization analysis was carried out in order to reduce the vibration and noise of the structure. The study shows that the radiation noise of the structure can be reduced by increasing the number of reinforcing bars and ply layers. [0°/90°/45°] attains the lowest radiation noise out of the three ply angles. At the first wave crest, the value of the acoustic radiation power after optimization is reduced by approximately 4 dB compared with that before optimization. The results can provide theoretical basis for reducing structural radiation noise.

参考文献/References:

[1] 王绍清, 刘鹏, 梁森. 复合材料层合板动力学性能及影响参数的研究[J]. 玻璃钢/复合材料, 2018(12): 36-40.[2] LEE S, KIM M, PARK C, et al. Effect of fiber orientation on acoustic and vibration response of a carbon fiber/epoxy composite plate: Natural vibration mode and sound radiation[J]. International Journal of Mechanical Sciences, 2016, 117: 162-173.[3] SHARMA N, MAHAPATRA T, PANDA S. Vibro-acoustic behaviour of shear deformable laminated composite flat panel using BEM and the higher order shear deformation theory[J]. Composite Structures, 2017, 180: 116-129.[4] 黎胜, 赵德有. 复合材料层合板的铺层几何对结构声传输的影响[J]. 振动与冲击, 2001, 20(2): 86-88.[5] 王嘉伟. 碳纤维复合材料板振声模拟及其参数影响特性研究[D]. 济南: 山东大学, 2019.[6] 王县委, 吴锦武. 不同铺设角度下层合板结构参数对声功率影响[J]. 应用声学, 2016, 35(2): 144-150.[7] 张英蓉, 沈火明, 张鑫, 等. 加筋位置对铝型材板振动声辐射特性的影响分析[J]. 四川理工学院学报(自然科学版), 2016, 29(6): 48-51.[8] 胡莹, 李晨曦, 林森. 复合材料机身结构声学特性及影响参数分析[J]. 应用声学, 2019, 38(3): 333-344.[9] 陈炉云, 张裕芳. 基于遗传算法的复合材料结构-声辐射优化研究[J]. 复合材料学报, 2012, 29(3): 203-207.[10] 段尊义. 纤维增强复合材料框架结构拓扑与纤维铺角一体化优化设计[D]. 大连: 大连理工大学, 2016.

相似文献/References:

[1]刘成武、郭小斌.薄板结构振动声辐射特性分析及优化[J].福建工程学院学报,2020,18(04):375.[doi:10.3969/j.issn.1672-4348.2020.04.013]
　LIU Chengwu,GUO Xiaobin.Analysis and optimization of vibration acoustic radiation characteristics 〖JZ〗of thin plate structure[J].Journal of FuJian University of Technology,2020,18(06):375.[doi:10.3969/j.issn.1672-4348.2020.04.013]

更新日期/Last Update: 2020-12-25