[1]陈宝健、范冰辉、刘益宝.基于BIM技术的桥梁工程施工成本控制[J].福建工程学院学报,2019,17(03):236-241.[doi:10.3969/j.issn.1672-4348.2019.03.006]
　CHEN Baojian,FAN Binghui,LIU Yibao.Cost control of bridge construction based on BIM tehnique[J].Journal of FuJian University of Technology,2019,17(03):236-241.[doi:10.3969/j.issn.1672-4348.2019.03.006]
点击复制

基于BIM技术的桥梁工程施工成本控制()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第17卷
期数:
2019年03期
页码:
236-241
栏目:
出版日期:
2019-06-25

文章信息/Info

Title:
Cost control of bridge construction based on BIM tehnique
作者:
陈宝健、范冰辉、刘益宝
福建船政交通职业学院管理工程系
Author(s):
CHEN Baojian; FAN Binghui; LIU Yibao
Department of Management Engineering, Fujian Chuanzheng Communications College
关键词:
桥梁工程; 成本控制; 动态纠偏; BIM; 挣得值
Keywords:
bridge engineering;  cost control;  dynamic correction;  BIM;  earned value
分类号:
TU17
DOI:
10.3969/j.issn.1672-4348.2019.03.006
文献标志码:
A
摘要:
将建筑信息模型(BIM)技术结合动态纠偏成本控制理论，提出基于BIM-5D的挣得值分析法。该方法包括三维模型创建、BIM-5D工程量统计、挣得值参数计算及S型曲线分析等过程。将该方法应用于对某跨海大桥的施工成本分析，结果表明，该方法准确反映了项目的成本控制水平，揭示了影响成本控制的因素并针对性地提出了成本纠偏的措施。
Abstract:
A BIM-5D based earned value analysis method was proposed, combining the building information model (BIM) technique with the dynamic correction of cost control theory. The method consists of three-dimensional model building, BIM-5D engineering statistics, earned value parameter calculation and S-shaped curve analysis. The method was applied to the construction cost analysis of a cross-sea bridge. Results indicate that, the method accurately reflects the cost control level of the project, reveals factors affecting the cost control and puts forward the cost correction measures.

参考文献/References:

[1]程建华, 王辉. 项目管理中BIM技术的应用与推广[J]. 施工技术, 2012, 41(16): 18-21, 60.[2] 刘智敏, 王英, 孙静, 等. BIM技术在桥梁工程设计阶段的应用研究[J]. 北京交通大学学报, 2015, 39(6): 80-84. [3] 王亮. 基于BIM的斜拉桥设计应用与信息管理研究[D]. 成都: 西南交通大学, 2016.[4] 林友强, 曾明根, 马天乐, 等. 桥梁工程设计BIM技术应用探索[J]. 结构工程师, 2016, 32(4): 7-12. [5] 孙彦玲. 挣得值分析法在房地产项目成本管理中的应用研究[D]. 济南: 山东大学, 2012.[6] 曹在伟. 赢得值法在高校建设工程项目管理中的应用[J]. 价值工程, 2013(32): 68-70.[7] JOHANSSON M, ROUP M, BOSCHSIJTSEMA P. Realtime visualization of building information models (BIM)[J]. Automation in Construction, 2015, 54: 69-82. [8] ZHENG X, LU Y J, LI Y K, et al. Quantifying and visualizing value exchanges in building information modeling (BIM)projects[J]. Automation in Construction, 2019, 99: 91-108.[9] CHEN P H, NGUYEN T C. A BIMWMS integrated decision support tool for supply chain management inconstruction[J]. Automation in Construction, 2019, 98: 289-301.

相似文献/References:

[1]张玮.重载交通路段的桥梁汽车荷载效应评估[J].福建工程学院学报,2022,20(01):42.[doi:10.3969/j.issn.1672-4348.2022.01.007]
　ZHANG Wei.Assessment of vehicle load effects of bridges in heavy-loaded traffic sections[J].Journal of FuJian University of Technology,2022,20(03):42.[doi:10.3969/j.issn.1672-4348.2022.01.007]
[2]暨邦冲.中欧规范钢-混组合梁抗弯承载力计算方法对比[J].福建工程学院学报,2022,20(01):53.[doi:10.3969/j.issn.1672-4348.2022.01.009]
　JI Bangchong.Comparison of calculation methods for flexural load capacity of steel-composite beams based on Chinese and European codes[J].Journal of FuJian University of Technology,2022,20(03):53.[doi:10.3969/j.issn.1672-4348.2022.01.009]

更新日期/Last Update: 2019-06-25