[1]王海龙,梁卫抗,王乾廷,等.6061铝合金热变形行为与热加工图[J].福建工程学院学报,2022,20(01):35-41.[doi:10.3969/j.issn.1672-4348.2022.01.006]
　WANG Hailong,LIANG Weikang,WANG Qianting,et al.Study on thermal deformation behavior and thermal processing map of aluminum alloy 6061[J].Journal of FuJian University of Technology,2022,20(01):35-41.[doi:10.3969/j.issn.1672-4348.2022.01.006]
点击复制

6061铝合金热变形行为与热加工图()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第20卷
期数:
2022年01期
页码:
35-41
栏目:
出版日期:
2022-02-25

文章信息/Info

Title:
Study on thermal deformation behavior and thermal processing map of aluminum alloy 6061
作者:
王海龙; 梁卫抗; 王乾廷; 林光磊
福建工程学院材料科学与工程学院
Author(s):
WANG Hailong;  LIANG Weikang;  WANG Qianting;  LIN Guanglei
School of Materials Science and Engineering, Fujian University of Technology
关键词:
6061铝合金; 流变应力; 本构方程; 热加工图
Keywords:
aluminum alloy 6061;  flow stress;  constitutive equation;  thermal processing map
分类号:
TG146.2
DOI:
10.3969/j.issn.1672-4348.2022.01.006
文献标志码:
A
摘要:
基于Gleeble-3500热模拟试验机平台，对6061铝合金进行等温热压缩实验，研究了该合金在变形温度为350~500℃和应变速率为0.01~10s-1条件下的高温流变行为并建立了6061铝合金的Arrhenius本构方程，应用于Deform软件进行热压缩实验模拟基于动态材料模型和Murty准则，建立了6061铝合金在不同应变下的加工图，结合显微组织进行验证。结果表明，该合金材料的流变应力随应变速率增加而增大，随变形温度降低而增大建立的本构方程能较好描述该合金的高温流变行为变形温度为460~500℃，应变速率为0.1~0.5s-1的区域是该合金最佳工艺参数范围。
Abstract:
Based on the Gleeble-3500 thermal simulation testing machine platform, isothermal compressive experiments were performed for aluminum alloy 6061, and the high temperature flow behavior of the alloy was studied at deformation temperature of 350 ~ 500 ℃ and strain rate of 0.01 ~ 10 s-1. According to the test data, the Arrhenius constitutive equation of 6061 aluminum alloy was established. The established Arrhenius constitutive equation for the alloy was applied to the Deform software for experimental simulation of thermal compression. According to the dynamic material model and Murty method, the processing map of the alloy at different strains was established and verified by the microstructure. Results show that the flow stress of the alloy increases with the increase of strain rate and the decrease of deformation temperature. The established constitutive equation could better describe the flow behavior of the alloy at high temperature. The optimal process parameters for the alloy were the range with a deformation temperature of 460 ~ 500 ℃ and a strain rate of 0.1 ~ 0.5 s-1.

参考文献/References:

[1] 于洪兵, 杜艳丽. 合金化及热处理对汽车用6061铝合金组织与性能的影响[J]. 铸造技术, 2017, 38（10）: 2374-2376.[2] SANABRIA V, GENSCH F, MUELLER S. Application of friction shear test for constitutive modeling evaluation of magnesium alloy AZ31B at high temperature[J]. Procedia Manufacturing, 2020, 47: 237-244.[3] CHEN X X, ZHAO G Q, ZHAO X T, et al. Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions[J]. Journal of Manufacturing Processes, 2020, 59: 326-342.[4] WEI T, WANG Y D, TANG Z H, et al. The constitutive modeling and processing map of homogenized Al-Mg-Si-Cu-Zn alloy[J]. Materials Today Communications, 2021, 27: 102471.[5] 曾卫东, 周义刚, 周军, 等. 加工图理论研究进展[J]. 稀有金属材料与工程, 2006, 35（5）: 673-677.[6] 康军伟, 周延军, 刘海涛, 等. C17200合金热变形行为及热加工图[J]. 材料热处理学报, 2020, 41（10）: 130-136.[7] 王晓溪, 张翔, 王华东, 等. 基于热加工图的6061铝合金热压缩变形特性研究[J]. 特种铸造及有色合金, 2017, 37（9）: 944-948.[8] 刘崇亮, 权高峰, 周明扬, 等. 铸态Mg-8Y-6Gd-1Nd-0.17Zn稀土镁合金高温压缩本构行为及加工图[J]. 稀有金属材料与工程, 2020, 49（8）: 2591-2598.[9] ZHANG T, ZHANG S H, LI L, et al. Modified constitutive model and workability of 7055 aluminium alloy in hot plastic compression[J]. Journal of Central South University, 2019, 26（11）: 2930-2942.[10] 张彦敏, 陈赛, 葛学元, 等. 6082铝合金热变形行为及热加工图[J]. 塑性工程学报, 2018, 25（4）: 113-121.

更新日期/Last Update: 2022-02-25