[1]刘琼,黄国钦.2D C/C-SiC 复合材料钻削加工试验研究[J].福建工程学院学报,2019,17(01):7-12.[doi:10.3969/j.issn.1672-4348.2019.01.002]
　LIU Qiong,HUANG Guoqin.Experimental study on drilling processing of 2D C/C-SiC composites[J].Journal of FuJian University of Technology,2019,17(01):7-12.[doi:10.3969/j.issn.1672-4348.2019.01.002]
点击复制

2D C/C-SiC 复合材料钻削加工试验研究()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第17卷
期数:
2019年01期
页码:
7-12
栏目:
出版日期:
2019-02-25

文章信息/Info

Title:
Experimental study on drilling processing of 2D C/C-SiC composites
作者:
刘琼; 黄国钦
福建工程学院 材料科学与工程学院
Author(s):
LIU Qiong;  HUANG Guoqin
School of Materials Science and Engineering
关键词:
硬质合金麻花钻;  碳纤维复合材料;  钻削;  钻削轴向力
Keywords:
carbide twist drill;  carbon fiber composites;  drilling;  drilling axial force
分类号:
TH161
DOI:
10.3969/j.issn.1672-4348.2019.01.002
文献标志码:
A
摘要:
采用硬质合金麻花钻对二维正交编织结构碳纤维增强陶瓷基复合材料（2D C/C-SiC）进行了钻削试验研究。通过分析钻削的过程，研究了钻削加工参数对钻削轴向力、力矩以及孔加工质量的影响规律。结果表明：钻削加工参数对钻削轴向力及力矩影响很大，轴向力和力矩随着进给速度的增大逐渐增大，随着钻头转速的增加而减小。所以，采用较小的进给速度和较大的转速可以提高孔的加工质量。
Abstract:
Carbide twist drill was used to drill two-dimensional orthogonal braided carbon fiber reinforced ceramic matrix composites (2D C/C-SiC). By analyzing the drilling process, the influence of drilling parameters on the drilling axial force and torque as well as the hole processing quality were studied. Results show that the drilling parameters have a great influence on the drilling axial force and torque. The axial force and torque gradually increase with the increase of feed, and decrease with the increase of bit speed. The processing quality of holes can be improved by using a smaller feed and a larger rotational speed.

参考文献/References:

[1]HOCHENG H, TAI N H, LIU C S. Assessment of ultrasonic drilling of C/SiC composite material[J]. Composites: Part A. 2000, 2(31): 133-142.[2]LIU Y, WANG J, LI W, et al. Effect of energy density and feeding speed on micro-holes drilling in SiC/SiC composites by picosecond laser[J]. Journal of Materials Processing Technology, 2016, 84(9/10/11/12): 1917-1925.[3]丁凯，傅玉灿，苏宏华，等. C/SiC复合材料组织对磨削力与加工表面质量的影响[J]. 中国机械工程, 2013, 14(24): 1886-1890.[4]刘琼, 黄国钦, 徐西鹏. 2D-C/SiC复合材料磨削加工表面形成机制[J]. 福州大学学报(自然科学版), 2018, 46(2): 1-6.[5]TAWAKOLI T, AZARHOUSHANG B. Intermittent grinding of ceramic matrix composites(CMCs) utilizing a developed segmented wheel [J]. International Journal of Machine Tools & Manufacture. 2011, 51(2): 112-119.[6]杨进, 李鹏南, 唐思文, 等．金刚石涂层钻头钻削碳纤维增强复合材料的工艺[J]. 机械设计与研究, 2014, 30(5): 119-124.[7] MEI H, WANG H, DING H, et al. Strength and toughness improvement in a C/SiC composite reinforced with slurry-prone SiC whiskers [J]. Ceramics International, 2014, 9(40): 14099-14104.[8] FENG P F, WANG J J, ZHANG J F, et al. Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites [J]. Ceramics International, 2017, 43(1): 791-799.[9] 张国栋, 邓建新, 张克栋, 等. C/〖KG-*6〗C-SiC 复合材料钻削加工工艺研究[J]. 工具技术, 2014, 48(9): 12-16.[10] XING Y Q , DENG J X, ZHANG G D, et al. Assessment in drilling of C/〖KG-*6〗C-SiC composites using brazed diamond drills [J]. Journal of Manufacturing Processes, 2017, 26: 31-43.[11] TSAO C C. Effect of pilot hole on thrust force by saw drill[J]. International Journal of Machine Tools & Manufacture, 2007, 47(14): 2172-2176.

更新日期/Last Update: 2019-02-25