[1]赖章鹏、黄卫东、陈广宇、洪浩、张伟杰.数控玻璃加工机床横梁有限元分析及优化设计[J].福建工程学院学报,2020,18(01):23-28.[doi:10.3969/j.issn.1672-4348.2020.01.005]
　LAI Zhangpeng,HUANG Weidong,CHEN Guangyu,et al.Finite element analysis and optimization design of beam for CNC glass machine tool[J].Journal of FuJian University of Technology,2020,18(01):23-28.[doi:10.3969/j.issn.1672-4348.2020.01.005]
点击复制

数控玻璃加工机床横梁有限元分析及优化设计()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第18卷
期数:
2020年01期
页码:
23-28
栏目:
出版日期:
2020-02-25

文章信息/Info

Title:
Finite element analysis and optimization design of beam for CNC glass machine tool
作者:
赖章鹏、黄卫东、陈广宇、洪浩、张伟杰
福建工程学院机械与汽车工程学院
Author(s):
LAI Zhangpeng;  HUANG Weidong;  CHEN Guangyu;  HONG Hao;  ZHANG Weijie
School of Mechanical and Automotive Engineering, Fujian University of Technology
关键词:
数控玻璃加工机床;  横梁;  优化设计
Keywords:
CNC glass machine tool;  beam;  optimization design
分类号:
TH122
DOI:
10.3969/j.issn.1672-4348.2020.01.005
文献标志码:
A
摘要:
横梁是数控玻璃加工机床关键零部件，利用ANSYS软件对其进行静、动态特性分析以及谐响应分析，获得了横梁极端工况的变形情况以及前六阶固有频率和振型，确认第2阶固有频率易引起横梁共振。以提高二阶固有频率为优化设计目标，横梁结构尺寸为优化变量，运用Isight软件及灵敏度分析方法对其进行优化。结果表明:优化后横梁质量减少了12.88kg，静变形量减少29.22kg，二阶固有频率增大13.34Hz。
Abstract:
Beam is a key component of CNC glass machine tools. The ANSYS software was used to conduct analysis on its static and dynamic characteristics and harmonic response, and obtained the deformation of the beam under extreme conditions and the first six natural frequencies and modes. It was confirmed that the second-order natural frequency tends to cause beam resonance. With improving the second-order natural frequency as the optimization design objective, and the beam structure sizes as the optimal variables, optimization was conducted by using the software Isight and the sensitivity analysis method. Results show that the mass of the optimized beam was reduced by 12.88 kg, the static deformation was reduced by 29.22 μm, and the second-order natural frequency was increased by 13.34 Hz.

参考文献/References:

[1] 董晓传, 金淼, 姚阳, 等. 基于等效梁长法的组合深梁临界预紧力计算模型[J]. 机械工程学报, 2015, 51(15): 46-52.[2] 郭琳娜, 郑天池, 鞠家全, 等. 动梁龙门加工中心横梁结构设计与优化[J]. 现代制造工程, 2017(6): 90-93.[3] 朱金波, 徐如涛, 高新红, 等. 基于多目标优化的龙门加工中心动横梁筋板结构优化设计方法[J]. 组合机床与自动化加工技术, 2015(10): 41-44. [4] 郭隐彪, 杨炜, 王振忠. 磨削加工工艺及应用[M]. 北京: 国防工业出版社, 2010.[5] 上海市金属切削技术协会. 金属切削手册[M]. 3版.上海： 上海科学技术出版社,2000. [6] 杨建交, 张俊, 赵慧, 等. 双主轴铣削加工中心立柱的静动特性分析及多目标优化[J]. 机床与液压, 2018, 46(4): 52-56.[7] 林静. 龙门机床横梁有限元静动态特性分析及结构设计与优化[D]. 西安： 陕西理工学院, 2016. [8] 中国机械工程学会机械设计分会. 现代机械设计方法[M]. 北京: 机械工业出版社, 2012.[9] IMANISHI E, NANJO T, KOBAYASHI T. Dynamic simulation of wire rope with contact[J]. Journal of Mechanical Science and Technology, 2009, 23(4): 1083-1088.[10] 桂志伟. 累计表图像读数技术的研究[D]. 广州: 广东工业大学, 2009.

更新日期/Last Update: 2019-02-25