[1]黄登峰,闫晓磊,钟勇.基于拓扑和尺寸优化的汽车C型梁结构轻量化设计[J].福建工程学院学报,2018,16(06):526-529.[doi:10.3969/j.issn.1672-4348.2018.06.004]
　HUANG Dengfeng,YAN Xiaolei,ZHONG Yong.Lightweight design of automotive C-beam based on topology and size optimization[J].Journal of FuJian University of Technology,2018,16(06):526-529.[doi:10.3969/j.issn.1672-4348.2018.06.004]
点击复制

基于拓扑和尺寸优化的汽车C型梁结构轻量化设计()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第16卷
期数:
2018年06期
页码:
526-529
栏目:
出版日期:
2018-12-25

文章信息/Info

Title:
Lightweight design of automotive C-beam based on topology and size optimization
作者:
黄登峰; 闫晓磊; 钟勇
福建工程学院机械与汽车工程学院
Author(s):
HUANG Dengfeng;  YAN Xiaolei;  ZHONG Yong
School of Mechanical and Automobile Engineering, Fujian University of Technology
关键词:
C型梁; 拓扑优化; 尺寸优化; 结构轻量化
Keywords:
C-beam;  topology optimization;  size optimization;  structure lightweighting
分类号:
U463
DOI:
10.3969/j.issn.1672-4348.2018.06.004
文献标志码:
A
摘要:
以商用车空气悬架C型梁为研究对象，采用材料替换并结合拓扑和尺寸优化的方法进行轻量化设计。基于变密度法，以结构刚度最大化为目标进行拓扑优化，获得结构初始构型。在拓扑优化结果的基础上，综合考虑3种工况，以板件厚度为设计变量，各工况下的应力和变形为约束条件，质量最小化为目标，进一步进行尺寸优化。优化结果表明，设计方案满足结构刚强度要求，降低了结构的质量，达到了轻量化的效果。
Abstract:
With the commercial vehicle’s air suspension C-beam as the research object, the material replacement was combined with topology and size optimization for lightweight design. Firstly, based on the variable density method, the topology optimization was carried out with the aim of maximizing the structural stiffness, and the initial configuration of the structure was obtained. Then, based on the results of topology optimization, considering three work conditions, further size optimization was conducted, which took the thicknesses of the plate as the design variable, the stress and deformation under each working condition as the constraints and the minimization of mass as the target. Optimization results show that the design not only satisfies the structural strength requirements, but also significantly reduces the mass of the structure and achieves a lightweight effect.

参考文献/References:

[1] LEE Soo-lyong, LEE Dong-chan, LEE Jeong-ick. Integrated process for structural-topological configuration design of weight-reduced vehicle components[J]. Finite Elements in Analysis and Design, 2007, 43: 620-629.
[2] KAYA Necmettin, KAREN Idris, ATRK Ferruh. Re-design of a failed clutch fork using topology and shape optimization by the response surface method[J]. Materials and Design, 2010, 31: 3008-3014.
[3] 朱剑峰, 王水莹, 林逸, 等. 后副车架拓扑优化概念设计和智能轻量化方法研究[J]. 汽车工程, 2015, 37(12): 1471-1476.
[4] JANG Gang-won, YOON Min-su Yoon, PARK Jae-ha Park. Lightweight flatbed trailer design by using topology and thickness optimization[J]. Strucfural & Multidisciplihary Optimization, 2010, 41: 295-307.
[5] TORSTENFELT B, KLARBRING A. Conceptual optimal design of modular car product families using simultaneous size, shape and topology optimization[J]. Finite Elements in Analysis and Design, 2007, 43: 1050-1061.
[6] 吴道俊, 钱立军, 祝安定, 等. 基于疲劳寿命的车架支架结构优化[J]. 汽车工程，2013, 35(10): 863-867.
[7] 张伟, 侯文彬, 胡平. 基于拓扑优化的电动汽车白车身优化设计[J]. 湖南大学学报(自然科学版), 2014,41(10):42-48.
[8] ESCHENAUER Hans A, OLHOFF Niels. Topology optimization of continuum structures: a review[J]. Applied Mechanics Reviews, 2001, 54(4): 331-390.

相似文献/References:

[1]闫晓磊,何炬,许启旺,等.基于改进BESO算法的集材绞盘机卷筒优化设计[J].福建工程学院学报,2019,17(01):50.[doi:10.3969/j.issn.1672-4348.2019.01.009]
　YAN Xiaolei,HE Ju,XU Qiwang,et al.Optimal design of the yarder friction roll based on improved BESO method[J].Journal of FuJian University of Technology,2019,17(06):50.[doi:10.3969/j.issn.1672-4348.2019.01.009]
[2]王乾廷,吴鹏,马莹,等.一种新型骨料散装机的结构设计与分析[J].福建工程学院学报,2023,21(01):1.[doi:10.3969/j.issn.1672-4348.2023.01.001]
　WANG Qianting,WU Peng,MA Ying,et al.Structure design and analysis of a new type of aggregate bulk loader[J].Journal of FuJian University of Technology,2023,21(06):1.[doi:10.3969/j.issn.1672-4348.2023.01.001]

更新日期/Last Update: 2018-12-25