[1]梅文豪,李济泽,戴福全.基于机器视觉的电机端盖孔直径的在线测量[J].福建工程学院学报,2018,16(04):341-345.[doi:10.3969/j.issn.1672-4348.2018.04.007]
 MEI Wenhao,LI Jize,DAI Fuquan.Online measurement of the motor cover hole diameter based on machine vision[J].Journal of FuJian University of Technology,2018,16(04):341-345.[doi:10.3969/j.issn.1672-4348.2018.04.007]
点击复制

基于机器视觉的电机端盖孔直径的在线测量()
分享到:

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第16卷
期数:
2018年04期
页码:
341-345
栏目:
出版日期:
2018-08-25

文章信息/Info

Title:
Online measurement of the motor cover hole diameter based on machine vision
作者:
梅文豪李济泽戴福全
福建工程学院机械与汽车工程学院
Author(s):
MEI Wenhao LI Jize DAI Fuquan
School of Mechanical and Automotive Engineering, Fujian University of Technology
关键词:
电机端盖视觉在线测量
Keywords:
motor cover vision online measurement
分类号:
TP39
DOI:
10.3969/j.issn.1672-4348.2018.04.007
文献标志码:
A
摘要:
构建了基于机器视觉的电机端盖孔直径尺寸的在线测量系统,利用halcon软件包对CCD工业相机参数标定,处理了电机端盖图像,通过边缘特征提取,计算电机端盖孔直径尺寸,与千分尺测量结果对比,验证了本文提出的电机端盖孔直径视觉测量方法能够满足生产需要。
Abstract:
An online measurement system for the motor cover hole diameter based on machine vision was constructed. The parameters of CCD industial camera were calibrated with the Halcon software package. The image of the motor cover hole was processed to extract the edge features, with which the size of the motor cover hole diameter was caculated. The measurement results of the micrometer helped verify that the vision-based measurement method for the motor cover hole diameter can meet the production needs.

参考文献/References:

[1] 崔贵波, 吴伏家, 常兴. 深孔加工过程中实时检测的研究[J]. 解决方案, 2008(3): 66-69.
[2] 叶树亮, 谭久彬. 基于动态阿贝原则的高精度激光深孔内径测量[J]. 光电子·激光, 2008, 8(15): 971-974.
[3] 王家贵, 李林峰. 基于迈克尔逊干涉原理的孔径测量及装置设计[J]. 工具技术, 2013, 47(4): 58-60.
[4] CUI J, FENG K, HU Y, et al. A twin fiber bragg grating probe for the dimensional measurement of microholes[J]. IEEE Photonics Technology Letters, 2014, 26(17): 1778-1781.
[5] 赵海峰, 郭燕, 段向军, 等. 自定心孔径测量机器人: 20160910843252. X[P], 2016-09-23.
[6] ANBALT K, ZELENJUK A, TAUBERT D R. New PTB setup for the absolute calibration of the spectral responsivity of radiation thermomete[J]. International Journal of ThermoPhysics, 2009, 30(l): 192-202.
[7] MA Y Z, YU Y X, WANG X H. Diameter measuring technique based on capacitive probe for deep hole or obl-ique hole monitoring[J]. Measurement, 2014, 47(1): 42-44.
[8] 张世杰, 曹喜滨, 张凡, 等. 基于特征点的空间目标三维位姿单目视觉确定算法[J]. 中国科学, 2010, 40(4): 591-604.
[9] LUO Z X, XUE L, SUN F J, et al. Camera calibration based on HALCON[J]. Video Engineering, 2010(4): 102-104.

更新日期/Last Update: 2018-08-25