[1]龙建辉,陈海涛,兰家旺,等.基于图像轮廓曲线提取的CT系统参数标定[J].福建工程学院学报,2018,16(01):44-49.[doi:10.3969/j.issn.1672-4348.2018.01.009]
 LONG Jianhui,CHEN Haitao,LAN Jiawang,et al.CT system’s parameter calibration based on the extraction of image contour curves[J].Journal of FuJian University of Technology,2018,16(01):44-49.[doi:10.3969/j.issn.1672-4348.2018.01.009]
点击复制

基于图像轮廓曲线提取的CT系统参数标定()
分享到:

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第16卷
期数:
2018年01期
页码:
44-49
栏目:
出版日期:
2018-02-25

文章信息/Info

Title:
CT system’s parameter calibration based on the extraction of image contour curves
作者:
龙建辉陈海涛兰家旺陈世梅
福建工程学院数理学院
Author(s):
LONG Jianhui CHEN Haitao LAN Jiawang CHEN Shimei
School of Mathematics and Physics, Fujian University of Technology
关键词:
参数标定 图像轮廓提取 误差分析
Keywords:
parameters calibration extraction of image contour error analysis
分类号:
O241
DOI:
10.3969/j.issn.1672-4348.2018.01.009
文献标志码:
A
摘要:
CT系统安装时常存在误差,需对安装好的系统进行参数标定。基于图像轮廓曲线的提取,通过建立数学模型来标定CT系统参数,标定了CT系统探测器单元间的距离、旋转角度和旋转中心,并对对应标定参数进行误差分析。
Abstract:
Errors always occur in the installation of the CT system, so it is necessary to calibrate the parameters of the installed system. Based on the extraction of image contour curves, a mathematical model was established to calibrate the parameters of the CT system. The distance between two adjacent receivers of CT system, the rotation angle and the rotation center were calibrated; error analysis were made for the corresponding calibration parameters.

参考文献/References:

[1] 王召巴.旋转中心偏移对CT重建图像质的影响[J].兵工学报,2001(3):323-326.
[2] 孟凡勇.基于投影原始数据的CT旋转中心精确确定方法[C].中国体视学学会.第十三届中国体视学与图像分析学术会议论文集.北京:中国体视学学会,2013:6.
[3] 李保磊,傅健,黄巧珍,等.一种基于正弦图的工业CT系统转台旋转中心自动确定方法[J].航空学报,2009,30(7):1341-1345.
[4] 赵雨晴,丛长虹,胡春红,等.基于正弦图的投影旋转中心校正方法[J].图学学报,2017,38(4):596-602.
[5] 邹慧.工业CT系统误差源—角度及尺寸误差的校准方法研究[D].杭州:中国计量学院,2014.

更新日期/Last Update: 2018-02-25