[1]许琼琦,梁卫抗,刘琼,等.汽车安全玻璃安装托架注塑粘结底涂工艺研究[J].福建工程学院学报,2017,15(06):563-567.[doi:10.3969/j.issn.1672-4348.2017.06.012]
　Xu Qiongqi,Liang Weikang,Liu Qiong,et al.Study on injection molding and primer coating process of mounting brackets of automobile safety-glass[J].Journal of FuJian University of Technology,2017,15(06):563-567.[doi:10.3969/j.issn.1672-4348.2017.06.012]
点击复制

汽车安全玻璃安装托架注塑粘结底涂工艺研究()
分享到：

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第15卷
期数:
2017年06期
页码:
563-567
栏目:
出版日期:
2017-12-25

文章信息/Info

Title:
Study on injection molding and primer coating process of mounting brackets of automobile safety-glass
作者:
许琼琦; 梁卫抗; 刘琼; 李巍; 王乾廷
福建工程学院材料科学与工程学院
Author(s):
Xu Qiongqi;  Liang Weikang;  Liu Qiong;  Li Wei;  Wang Qianting
School of Materials Science and Engineering, Fujian University of Technology
关键词:
安全玻璃;  安装托架;  底涂工艺;  定位;  轨迹优化
Keywords:
safety-glass;  mounting bracket;  primer coating process;  positioning;  trajectory optimization
分类号:
TQ43;TH16;U463.9
DOI:
10.3969/j.issn.1672-4348.2017.06.012
文献标志码:
A
摘要:
底涂工艺是以汽车安全玻璃作为注塑嵌件的安装托架注塑粘结智能化生产的关键技术，底涂工艺主要受玻璃的定位和机械手涂布质量影响。针对玻璃的定位，提出采用自锁角的逐步筛选法得出分区域的3点有效定位方法，解决超定位带来的成本问题；同时，对机械手的“Z”字形的底涂路径进行折弯轨迹优化，实现了机械手底涂轨迹的连续光滑，保证机械手在底涂过程中运动的平稳性。采用上述底涂工艺进行安装托架的注塑粘结，得到的底涂厚度控制在20μm，且制备的安全玻璃安装托架的粘结质量良好，为实际生产起到了指导作用。
Abstract:
The primer coating process was the key technology in the intelligent injection molding of mounting brackets with automobile safety-glass used as the injection molding insert. The process was mainly affected by the positioning of the glass and the coating quality of the manipulator. Aiming at the positioning of the glass, a step-by-step screening method based on the self-locking angle was proposed to obtain the 3-point effective positioning method, which reduced the cost caused by repeated positioning. Meanwhile, the “Z” shaped coating path of the manipulator received bending trajectory optimization, which helped realize the continuous smoothness of the trajectory of the primer coating of the manipulator and ensured the smooth movement of the manipulator during the priming coating process. The primer coating process used for injection molding and bonding of the mounting bracket helped produce primer coating with a thickness of 20μm and safety-glass mounting brackets with superior adhesive quality. The above-mentioned process can provide guidance for the actual production.

参考文献/References:

[1] 《橡胶科技市场》编辑部. 2016年汽车产销量均超过2800万辆[J]. 橡胶科技, 2017, 15(3):43.
[2] 谢桂容.聚氨酯改性端硅烷聚醚密封胶的研究[D].广州：华南理工大学,2013.
[3] 沈慧芳, 陈焕钦.聚氨酯胶粘剂在汽车上的应用及研究进展[J].化学与粘合,2005,27(4):225-228.
[4] 李耀辉,殷兵.注塑模具嵌件成型技术研究与应用[J].制造技术与机床,2014(8):148-150.
[5] Emoto A, Kobayashi T, Noguchi N, et al. Tailoring adhesive forces between poly(dimethylsiloxane) and glass substrates using poly(vinyl alcohol) primers[J]. Journal of Applied Polymer Science,2014,131(6):1881-1888.
[6] 邱萍,黄江玲,刘彬,等.底涂对风窗玻璃用聚氨酯密封胶粘接性能的影响[J].粘接,2016(8):55-57.
[7] 杨曼,姜宏伟. -NCO基硅氧烷底涂剂对聚氨酯密封胶粘接性能的影响[J].中国胶粘剂,2011,20(6):42-46.
[8] 杜慧翔,黄活阳,王文鹏,等.硅烷偶联剂的偶联作用机理及其在密封胶中的应用[J]. 化学与粘合,2013,35(2):63-65.
[9] 曾勇,龚俊,许宁,等.喷涂机器人路径组合优化中喷枪轨迹参数的修正方法[J].中国机械工程,2014,25(6).
[10] 缪东晶,王国磊,吴聊,等.自由曲面均匀喷涂的机器人轨迹规划方法[J].清华大学学报(自然科学版),2013(10):1418-1423.
[11] 任秉银, 梁兆东, 孔民秀. 机械手空间圆弧位姿轨迹规划算法的实现[J].哈尔滨工业大学学报,2012,44(7):27-31.
[12] Barraquand J. A Monte-Carlo algorithm for path planning with many degrees of freedom[J]. Journal of Symbolic Logic,2014,31(1):109-111.
[13] 田兵.汽车挡风玻璃涂胶机器人设备可靠性改进[J].汽车工艺与材料,2004(10):20-21.
[14] 孙永红,曾辉,江波.汽车风挡涂胶机器人轨迹控制技术[J].汽车零部件,2011(1):81-82.
[15] 毛建旭,李明,周博文,等.汽车挡风玻璃定位与支架粘合视觉检测系统的设计与实现[J].电子测量与仪器学报,2017,31(3):343-352.
[16] Sheng W, Chen H, Xi N, et al. Tool path planning for compound surfaces in spray forming processes[J]. IEEE Transactions on Automation Science & Engineering,2005,2(3):240-249.

更新日期/Last Update: 2017-12-25