[1]李昆塬,童昕,李占福,等.基于DEM-FEM耦合的球磨机梯形衬板参数研究[J].福建工程学院学报,2017,15(06):523-527.[doi:10.3969/j.issn.1672-4348.2017.06.004]
 Li Kunyuan,Tong Xin,Li Zhanfu,et al.Research on parameters of ball mill’s trapezoidal liner based onDEM-FEM coupling approach[J].Journal of FuJian University of Technology,2017,15(06):523-527.[doi:10.3969/j.issn.1672-4348.2017.06.004]
点击复制

基于DEM-FEM耦合的球磨机梯形衬板参数研究()
分享到:

《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]

卷:
第15卷
期数:
2017年06期
页码:
523-527
栏目:
出版日期:
2017-12-25

文章信息/Info

Title:
Research on parameters of ball mill’s trapezoidal liner based onDEM-FEM coupling approach
作者:
李昆塬童昕李占福叶一青
福建工程学院机械与汽车工程学院
Author(s):
Li Kunyuan Tong Xin Li Zhanfu Ye Yiqing
School of Mechanical and Automotive Engineering, Fujian University of Technology
关键词:
球磨机 梯形衬板 离散元 有限元 正交试验
Keywords:
ball mill trapezoidal liner discrete element finite element orthogonal test
分类号:
TD453.1
DOI:
10.3969/j.issn.1672-4348.2017.06.004
文献标志码:
A
摘要:
通过DEM-FEM耦合的试验方法对半径为4 300 mm的大型球磨机进行试验仿真,研究梯形衬板在不同的倾角、顶边长度和高度的情况下,衬板所受到的总变形程度、应变和应力大小,借助正交试验分析,得出优方案和显著性影响因素。
Abstract:
A large-scale ball mill with a radius of 4300mm is simulated by DEM-FEM coupling.The total deformation, strain and stress of the trapezoidal liner at different inclinations, top edge lengths and heights were studied. Then, the optimized scheme and significant influencing factors were obtained through orthogonal tests.

参考文献/References:

[1] 朱祥,王国强,邵明亮.球磨机梯形衬板设计[J].矿山机械,1993(5):5-7.
[2] Rezaeizadeh M, Fooladi M, Powell M S, et al. A new predictive model of lifter bar wear in mills[J]. Minerals Engineering,2010,23(15):1174-1181.
[3] Yahyaei M,Banisi S, Hadizadeh M. Modification of SAG mill liner shape based on 3-D liner wear profile measurements[J]. International Journal of Mineral Processing,2009,91(3):111-115.
[4] Yahyaei M, Banisi S. Spreadsheet-based modeling of liner wear impact on charge motion in tumbling mills[J]. Minerals Engineering,2010,23(15):1213-1219.
[5] Djordjevic N. Discrete element modelling of the influence of lifters on power draw of tumbling mills[J]. Minerals engineering,2003,16(4):331-336.
[6] Djordjevic N. Influnce of charge size distribution on net-power draw of tumbling mill based on DEM modeling[J]. Minerals Engineering.2005,18(3):375-378.
[7] Jonsén P, P?lsson B I, Tano K, et al. Prediction of mill structure behaviour in a tumbling mill[J]. Minerals Engineering,2011,24(3):236-244.
[8] Jonsén P, P?lsson B I, H?ggblad H ?. A novel method for full-body modelling of grinding charges in tumbling mills[J]. Minerals Engineering,2012,33(6): 2-12
[9] Mindlin R D. Compliance of Elastic bodies in Contact[J]. Journal of Applied Mechanics,1949,16:259-268.
[10] 孙其城,王光谦.颗粒物质力学导论[M].北京:科学出版社,2009.
[11] 侯亚娟.基于离散元与有限元耦合的大型球磨机衬板性能研究[D].长春:吉林大学,2015.
[12] 李云雁,胡传荣.试验设计与数据分析[M].北京:化学工业出版社,2008.

更新日期/Last Update: 2017-12-25