[1]林定笑 陈栩 刘伟强 苏坚毅 施智鹏.多路功率分流齿轮啮入时序的优化研究[J].福建工程学院学报,2017,15(03):229-233.[doi:10.3969/j.issn.1672-4348.2017.03.006]
Lin Dingxiao,Cheng Xu,Liu Weiqiang,et al.Optimization of the meshing time sequence of multi-channel power split gear[J].Journal of FuJian University of Technology,2017,15(03):229-233.[doi:10.3969/j.issn.1672-4348.2017.03.006]
点击复制
多路功率分流齿轮啮入时序的优化研究(
)
《福建工程学院学报》[ISSN:2097-3853/CN:35-1351/Z]
- 卷:
-
第15卷
- 期数:
-
2017年03期
- 页码:
-
229-233
- 栏目:
-
- 出版日期:
-
2017-06-25
文章信息/Info
- Title:
-
Optimization of the meshing time sequence of multi-channel power split gear
- 作者:
-
林定笑 陈栩 刘伟强 苏坚毅 施智鹏
-
福建工程学院机械与汽车工程学院
- Author(s):
-
Lin Dingxiao; Cheng Xu; Liu Weiqiang; Su Jianyi; Shi Zhipeng
-
College of Mechanical and Automotive Engineering, Fujian University of Technology
-
- 关键词:
-
多路功率分流; 复合重合度; 啮入点; 啮入时序
- Keywords:
-
multi-channel power split; compound contact ratio; meshing point; meshing time sequence
- 分类号:
-
TH132.417
- DOI:
-
10.3969/j.issn.1672-4348.2017.03.006
- 文献标志码:
-
A
- 摘要:
-
针对传统外啮合齿轮箱功率密度较小，传递大功率时增大模数而导致齿轮箱尺寸剧增的问题，基于渐开线标准齿轮传动正确啮合条件及重合度计算理论，提出以多路功率分流外啮合定轴齿轮传动替代传统单外啮合齿轮传动，根据啮入点啮入时序排布方式，设计了同步啮入与依序逐步啮入两套方案。以3路功率分流的外啮合定轴齿轮传动为案例，通过复合重合度计算推导，发现在相同重合度下，与同步啮入时序方案相比，采用依序逐步啮入时序方案，齿轮传动更为平稳，在相同传动比、相同模数情况下，齿轮承载能力提高1/3。由此得出结论，以多路功率分流外啮合定轴齿轮传动，并采用各路啮入点依序逐步啮入时序方案，可以在有效提高齿轮箱的功率密度，大幅减少齿轮箱尺寸基础上，获得平稳传动，提高齿轮承载能力。
- Abstract:
-
To improve the power density of externally meshing gear box and to reduce the dimension of the gear box at large power transmission, multi-channel power split externally meshing fixed-axis gear transmission was presented based on standard gear transmission meshing condition and contact degree calculation theory to replace the traditional single externally meshing gear transmission. Synchronously meshing-in time sequence scheme and gradually ordered meshing-in time sequence scheme were designed in accordance with the meshing time sequence arrangement mode. In the case of three-channel power split externally meshing fixed-axis gear transmission, the gear transmission of the gradually ordered meshing scheme is more smooth compared to that of the synchronously meshing scheme, with the bearing capacity of the gear increasing by 1/3 under the same contact degree, the same transmission ratio and the same modulus. The results indicate that multi-channel power split externally meshing fixed-axis gear transmission integrated with the gradually ordered meshing scheme can implement smooth transmission and improve the gear bearing capacity while effectively increasing the power density of the gear box and reducing the dimension of the gear box.
参考文献/References:
[1] 孙桓，陈作模，葛文杰.机械原理［M］.北京：高等教育出版社，2013.
[2] 冯辉英，于兴芝.基于重合度对齿轮传动影响分析［J］.现代机械，2009（9）：7-9.
[3] 渠珍珍，杨杭旭.高重合度齿轮的实现方法及其参数设计［J］.机电技术，2012，6（3）：103-105.
[4] 贺建群，张峥嵘.渐开线圆柱齿轮传动的重合度计算［J］.机械设计与制造，2005，9（9）：25-26.
[5] 唐立山.一种新的渐开线直齿圆柱齿轮传动理论重合度算法［J］.机械设计与制造，2012，2（2）：54-55.
[6] 李建功.对GB3480－83中直齿轮重合度系数Zε的商榷［J］.河北理工学院学报，1999，21(1):25-28.
[7] 田培棠，田凌.圆柱齿轮几何计算原理及实用算法[M].北京：国防工业出版社，2012.
[8] 邵忍平. 机械系统动力学［M］.北京：机械工业出版社，2005.
更新日期/Last Update:
2017-06-25