[1]陈文滨,陈昌荣(通),黄旭,等.基于有限元法的超声辅助线锯单晶硅表面粗糙度影响规律[J].福建理工大学学报,2024,22(03):298-306.[doi:10.3969/j.issn.2097-3853.2024.03.014]
CHEN Wenbin,CHEN Changrong,HUANG Xu,et al.Influence of process parameters on surface roughness of ultrasonic-assisted wire sawed monocrystalline silicon based on finite element method[J].Journal of Fujian University of Technology;,2024,22(03):298-306.[doi:10.3969/j.issn.2097-3853.2024.03.014]
点击复制
基于有限元法的超声辅助线锯单晶硅表面粗糙度影响规律
《福建理工大学学报》[ISSN:2097-3853/CN:35-1351/Z]
- 卷:
-
第22卷
- 期数:
-
2024年03期
- 页码:
-
298-306
- 栏目:
-
- 出版日期:
-
2024-06-25
文章信息/Info
- Title:
-
Influence of process parameters on surface roughness of ultrasonic-assisted wire sawed monocrystalline silicon based on finite element method
- 作者:
-
陈文滨; 陈昌荣(通); 黄旭; 练国富; 冯美艳
-
(福建理工大学)福建省智能加工技术及装备重点实验室
- Author(s):
-
CHEN Wenbin; CHEN Changrong; HUANG Xu; LIAN Guofu; FENG Meiyan
-
Fujian Key Laboratory of Intelligent Processing Technology and Equipment
-
- 关键词:
-
单晶硅; 超声振动; 有限元仿真; 响应面法; 回归模型; 表面粗糙度
- Keywords:
-
monocrystalline; ultrasonic vibration; finite element simulation; response surface method; regression models; surface roughness
- 分类号:
-
TN305.1
- DOI:
-
10.3969/j.issn.2097-3853.2024.03.014
- 文献标志码:
-
A
- 摘要:
-
为研究超声振动辅助切割单晶硅对硅片的表面粗糙度的影响,利用ABAQUS 软件建立单颗磨粒切割单晶硅的二维仿真模型,通过响应面法(RSM)分析仿真数据,获得单晶硅表面粗糙度与设定的线切割工艺参数之间的交互关系,研究单颗磨粒在不同工艺参数下对单晶硅表面粗糙度的影响。研究结果表明,通过建立评价表面粗糙度与工艺参数之间的回归模型,并对模型进行目标优化,得到最佳的工艺参数为:超声频率f =31 kHz,超声振幅A =10 μm,磨粒速度vl =28 m/ s,磨粒倾角θ =-15°,磨粒半锥角φ =60°。
- Abstract:
-
In order to study the influence of ultrasonic vibration-assisted cutting of monocrystalline silicon on the surface roughness of silicon wafers, a two-dimensional simulation model of single abrasive grain cutting monocrystalline silicon was established by ABAQUS software, and the interaction between the surface roughness of monocrystalline silicon and the set wire-cutting process parameters was obtained by analyzing the simulation data by response surface method (RSM), and the influence of single abrasive grain on the surface roughness of monocrystalline silicon under different process parameters was studied. Results show that by establishing a regression model to evaluate the relationship between surface roughness and process parameters, and optimizing the model, the optimal process parameters are as follows: ultrasonic frequency f=31 kHz, ultrasonic amplitude A=10 μm, abrasive velocity vl=28 m/s, abrasive inclination angle θ=-15°, abrasive half cone angle φ=60°
参考文献/References:
[1] NAGARAJA S,CARRARA P,DE LORENZIS L. Experimental characterization and phase-field modeling of anisotropic brittle fracture in silicon[J]. Engineering Fracture Mechanics,2023,293:109684. [2] 李淑娟,万波,胡超. 基于RSM的SiC单晶片切割过程多目标优化[J]. 机械科学与技术,2014,33(3):452-459. [3] LI W,JIAO Y,JIANG H Y,et al. Investigation of mechanical force acting on the surface modified-substrate layer area during the chemical-mechanical micro-grinding of monocrystalline silicon[J]. International Journal of Mechanical Sciences,2022,228:107482. [4] 冉迪,苑泽伟,卞思文,等. 超声振动辅助切削单晶硅的剥离去除机制[J]. 组合机床与自动化加工技术,2023(8):163-166,182. [5] 张辽远,王硕,邵中青,等. 基于超声振动下电镀金刚石线切割单晶硅材料的实验研究[J]. 金刚石与磨料磨具工程,2013,33(5):71-75. [6] WANG Y,SONG L X,LIU J G,et al. Investigation on the sawing temperature in ultrasonic vibration assisted diamond wire sawing monocrystalline silicon[J]. Materials Science in Semiconductor Processing,2021,135:106070. [7] 郭明壮,王艳,宋李兴. 超声复合线锯锯切单晶硅的温度场仿真分析[J]. 农业装备与车辆工程,2021,59(3):98-102. [8] WANG Y,ZHAO B C,HUANG S J,et al. Study on the subsurface damage depth of monocrystalline silicon in ultrasonic vibration assisted diamond wire sawing[J]. Engineering Fracture Mechanics,2021,258:108077. [9] 朱帮迎. 单晶硅超精密切削仿真与实验研究[D]. 哈尔滨:哈尔滨工业大学,2015.[10] VENKATACHALAM S,LI X P,LIANG S Y. Predictive modeling of transition undeformed chip thickness in ductile-regime micro-machining of single crystal brittle materials[J]. Journal of Materials Processing Technology,2009,209(7):3306-3319. [11] 赵博成. 横向超声辅助金刚石线锯切割单晶硅亚表面损伤的研究[D]. 上海:上海理工大学,2021. [12] MUCHTAR A,LIM L C,LEE K H. Finite element analysis of vickers indentation cracking processes in brittle solids using elements exhibiting cohesive post-failure behaviour[J]. Journal of Materials Science,2003,38(2):235-243. [13] RICKHEY F,MARIMUTHU K P,LEE K,et al. Indentation cracking of monocrystalline silicon considering fracture anisotropy[J]. Theoretical and Applied Fracture Mechanics,2019,100:128-138.
更新日期/Last Update:
2024-06-25